The usage specifications for high-frequency welded pipe equipment are as follows:
1. Do not touch the mold during operation.
2. Before using high-frequency welded pipe equipment, we should check whether the lubrication points on the unit are fully lubricated.
3. Good daily maintenance and long service life.
We should do a good job in rust prevention of the parts and the entire machine of the welded pipe unit. Firstly, try to avoid placing welding pipeline equipment in damp places. In addition, rust and grease should also be removed. In addition to rust prevention, maintenance work must also be strictly carried out. The operation of the welding pipe unit equipment should strictly follow the normal operating procedures. Before starting the machine, regularly, fixedly, and quantitatively add lubricating oil to the machine according to the lubrication chart. The lubricating oil must be clean and free of impurities. The welding pipe unit regularly replaces the lubricating oil in the bearings and checks the electrical appliances to eliminate unreliable safety factors. The triangular belt, handle, knob, and key of the pipeline welding device should be regularly inspected for damage.
The specific welding process flow of high-frequency welded pipe equipment is as follows:
1. After the plate coil is correctly positioned, the left and right conical heads of the uncoiler can be inserted into the steel coil and rotated simultaneously. Place the magnetic head into the pinch roll and press it down on the pinch roll, allowing the coil car and magnetic roll to return to their original position.
2. In order to ensure precise alignment and operation of the spring steel section, the uncoiler before processing can move+150 millimeters along the axis. After the uncoiler is started, the steel section reaches the integrity of the machine and is cleaned of dust by squeezing the coil.
3. The hydraulic shear slides at the head and tail of the steel wire slice, straightening the steel spring.
The advantages of high-frequency welded pipe equipment are as follows:
1. From the perspective of economic benefits, the noise of welded pipe equipment is low; Adopting a circulating water cooling system, which is environmentally friendly and energy-saving.
2. In terms of usage, the use of welded pipes is becoming increasingly widespread, suitable for agricultural and industrial production.
3. In terms of quality, the finished welded pipe equipment has good quality, complete welds, few burrs, fast speed, and energy saving.
4. High frequency welded pipes are widely used and promoted due to their advantages such as good welding quality, small internal and external burrs, fast welding speed, and low power consumption.
5. The production of high-frequency welded pipe equipment has the characteristics of no pollution and low noise, and does not produce wastewater and exhaust gas. Circulating water cooling is used in production to save energy and protect the environment. It saves labor and only requires 5-8 people per shift. The welding speed is fast, and the welding speed of the unit can reach 20-70 meters/minute.
