Step 1, Preparation:
Before using high-frequency welding pipe equipment, we need to make necessary preparations to ensure safety and ensure the normal operation of the equipment. Firstly, we need to check if the equipment we are using is in good working condition. Secondly, we need to ensure that the equipment meets safety usage standards and uses necessary safety equipment such as gloves, glasses, and safety shoes to ensure that eyes, hands, and feet are not injured. Finally, we need to ensure that the materials we use meet the requirements and that we have professional knowledge and experience in operating the equipment. Only when these preparations are fully considered and implemented can we better utilize welded pipe equipment.
Step 2, use welded pipe equipment
Before carrying out welding operations, we need to treat and prepare the pipeline, which includes cutting both ends to the correct angle, cleaning the surface, and connecting the pipeline properly.
We can start using the high-frequency welding pipe equipment now, and we need to take the following steps:
1. Insert the welding rod into the electrode and perform appropriate oblique and insertion movements to ensure normal combustion of the welding rod and to separate the slag from the weld seam.
2. Adjust the current of the welding arc to adapt to the thickness and diameter of the welding material. At the same time, it is necessary to control the position of the welding rod and the length of the welding arc.
3. Move the welding rod and weld seam alternately and continue the welding process until the welding is completed.
4. Check if the weld is secure and ensure that there are no cracks or bends, so that we can confirm the integrity and quality of the weld.
When using welded pipe equipment, we need to follow some practical techniques to improve work efficiency and reduce errors and losses. For example, we can add a layer of red tears to the weld lubricant, so that the welding points can be easily located. In addition, we also need to pay attention to the length and diameter of the electrodes, and regularly clean and replace them.
Step 3, Cleaning and Maintenance
Cleaning and maintenance are very important when using welded pipe equipment. If not cleaned and maintained, the welding equipment will descend, making it prone to malfunctions and damage, and in severe cases, it may cause harm. Therefore, we need to follow the following guidelines:
1. Regularly maintain the equipment and clean and maintain it according to the instruction manual.
2. Clean and store the equipment immediately after use to prevent damage and corrosion.
High frequency welded pipe equipment can be used for welding bimetallic composite pipes such as air conditioning copper pipes, air conditioning copper pipes, and seamless steel pipes. Used for welding bimetallic composite pipes. After welding, the appearance is beautiful, solid, and round, and the heating is uniform without any missed welding or missed welding phenomenon. The advantages of high-frequency welded pipe equipment during operation are also very obvious, such as fast induction heating speed, high efficiency, energy saving, and low cost compared to oxygen welding. Small oxidation area, energy-saving and low cost, small oxidation area, beautiful appearance after welding, uniform heating, and no risk of welding leakage. In fact, the equipment has high efficiency, fast welding speed, 1-5 seconds per tooth, good repeatability, good repeatability per tooth, fast and uniform heating speed, which can effectively avoid cracks caused by tooth aging and local overheating, as well as safety hazards such as missing teeth caused by incomplete melting in the melting furnace. High frequency welded pipe equipment is a sawtooth woodworking saw blade with high performance and toughness. If you are interested in our related welding pipe equipment, please feel free to inquire at any time. We look forward to communication and cooperation with you.
